[A-DX] [studio1] ==> HAMLIB ==> [IC-R75 / FRG-100]

[Andreas Hatting]

Moin!

Wo bekommt man denn diese dll-Dateien bzw. die cfg-Datei?


55+73
Andreas
JRC NRD 545 DSP, Icom IC R-75, Perseus, Pappradio, RadioJet 1102S
12,5m LW, ALA 1530-SSB+, HDLA6, HDLA3, Pa0rdt Miniwhip,
aktive Eigenbau Quad-Loop
Locator JO32SU

Am 19.06.2013 10:05, schrieb Roger:
> Now I have found a way out from STUDIO1 to directly control the ICOM
> IC-R75 and the YAESU FRG-100
> For this purpose one can use the hamlib.
> The following files must be located in the STUDIO1-directory:
> ExtIO_HamLib.dll
> libhamlib-2.dll
> libusb0.dll
> hamlib-icom.dll  ===>  for ICOM-devices
> hamlib-yaesu.dll ===>  for YAESU-devices
> ExtIO_HamLib.cfg
>
> Here are the contents of ExtIO_HamLib.cfg for YAESU FRG-100:
> ====================================================================
> # write log messages to ExtIO_HamLib.log?  0 for no. 1 for yes.
> 1
> # model number as used in "rigctl -m <model>"
> # also see rigctl --list
> 117
> # radio device as used in "rigctl -r <port>" - full line is used!
> com1
> # LO / IF frequency offset f.e. 12000
> 5845
> ====================================================================
> "117"  is the model number for the YAESU FRG-100.
> "5845" is my special offset for the external IF-mixer in combination
> with FRG100-IF (+5,845 kHz)
>
>
>
> Here are the contents of ExtIO_HamLib.cfg for the ICOM IC-R75:
> ========================================================================================
>
> # write log messages to ExtIO_HamLib.log?  0 for no. 1 for yes.
> 1
> # model number as used in "rigctl -m <model>"
> # also see rigctl --list
> 339
> # radio device as used in "rigctl -r <port>" - full line is used!
> com1
> # LO / IF frequency offset f.e. 12000
> -11660
> ========================================================================================
>
> "339"  is the model number for the ICOM R-75.
> -11660 is my special offset for the internal IC-R75-IF-mixer (-11,66 kHz)
>
> complete list for other devices here:
> http://www.rhci-online.de/rigctl-l.gif
>
> http://www.rhci-online.de/HamLib-IC-R75.gif
> http://www.rhci-online.de/HamLib-FRG100.gif
>
> Works on the same principle also for "_HDSDR_".
> roger
> --
> -----------------------------------------------------------------------
> Diese Mail wurde ueber die A-DX Mailing-Liste gesendet.
> Admin: Christoph Ratzer, OE2CRM  http://www.ratzer.at
> -----------------------------------------------------------------------
> Private Verwendung der A-DX Meldungen fuer Hobbyzwecke ist gestattet, jede
> kommerzielle Verwendung bedarf der Zustimmung des A-DX Listenbetreibers.
>