[A-DX] SDR-Empfänger ATS-20+ (Arduino) FM AM (MW and SW) and SSB (LSB and USB)

Franz-Josef Koenigsmann
Montag, 20. März 2023, 13:36 Uhr

Hallo Zusammen,
verkaufe einen SDR Empfänger:

ATS-20+ Plus (Arduino)
Radio Receiver DSP SDR Receiver FM AM (MW and SW) and SSB (LSB and USB)

Description:
With 0.96" OLED display, it is a quality full-band radio receiver, supporting auto-hold setting function after power failure. Equipped with audio output, it supports 3.5mm earphone. Also, it supports 4ohm speaker 2W output. With 22 commercial and ham radio bands pre-configured, you can use it freely.

Zubehör: Antenne / USB-Kabel

Features:
- With a 0.96" OLED display, you can see the FM band, AGC on/off, MONO according to your demands
- Support auto-hold setting function after power failure
- Internal 3.6V 800mAh polymer lithium battery for stable and sustainable power supply
- Support USB recharging
- Equipped with audio output to support 3.5mm earphone
- Also support 8ohm speaker 1.5W output
- Antenna interface uses SMA interface and the printed circuit board retains the SI4732 package, you can replace the chip by yourselves, and the software is compatible
- With 22 commercial and ham radio bands pre-configured, you can use it freely
- Support band: FM, AM (MW and SW) and SSB (LSB and USB)
- Audio bandwidth filter 0.5, 1, 1.2, 2.2, 3 and 4Khz
- BFO Control
- Frequency step switch (1, 5 and 10KHz)

Specifications:
- Name: Radio Receiver
- Material: printed circuit board
- Item size: 89 * 107 * 41mm / 3.50 * 4.21 * 1.61in

Preis: 40€ + 5€ versicherten Empfang mit DHL

Bei Interesse bitte Email an: f-jkoe@...
-- 
73 / Gruß, FranJo